Technoplus 10*10mm
For Gypsum board work
Shadow gap edge trim profile 10*10mm designed for gypsum board application (1.25mm board thickness).Technoplus gives fine line straight edges also flexibility to install and reducing the plastering and finishing cost.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
Technoplus 20*20mm
For Gypsum board work
Shadow gap edge trim profile 20*20mm designed for gypsum board application (1.25mm board thickness).Technoplus gives fine line straight edges also flexibility to install and reducing the plastering and finishing cost, other gap size and board thickness available on request.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
For Gypsum board and metal ceiling work
Combination of technoplus 10*10mm with hemmed edge angle 30*15mm fixed by self tapping screw used to create a shadow gap effect between gypsum plaster board and metal suspended ceiling system.Edge trim angle size available from 15-25mm Gap size available from 10-25mm, other gap sizes and board thickness available on request.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
Metal Bulkhead/L Type
Metal bulkedhead (gypsum board to metal ceiling)
For any type of metal ceiling
L-Type bulkhead provide similar edge trims appearance for gypsum board and metal ceiling.The profile designed to reduce gypsum work time and material cost further to the colour matches of metal panels and bulk head that gives a homogeneous effect of the ceiling view.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
Metal Bulkhead/U Type
Metal bulkedhead (gypsum board to metal ceiling)
For clip-in or Lay-in metal ceiling.
U-Type bulkhead provide metal edge trim to flat board gypsum finish.The profile designed to reduce gypsum work time and material cost further to the colour matches of metal panels and bulkhead that gives a homogeneous effect of the ceiling view.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
Clip-in Bulkhead
Metal bulkedhead (gypsum board to metal ceiling)
For clip-in metal ceiling.
The profile provide clip in suspension with bulkhead fixed to flat board gypsum finish designed to reduce gypsum work time and material cost, further to the colour matches of metal panels and bulkhead without edge trim that gives a homogeneous effect of the ceiling view.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
Shadow Spring Carrier
For metal Corridor ceiling
The profile use for corridor clip in ceiling system , providing shadow gap trim 10-20mm without suspension system. Other gap size available on request.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
Shadow Track
For drywall partitions system
The profile used as track or runner for stud profiles of partitions systems given a shadow gap effect 10*10mm, on bottom side around the drywall partitions.
| Thickness(mm) | Length(mm) | Colour | |
|---|---|---|---|
|
Pre painted steel |
0.45-0.6 |
Up to 3000 |
White |
|
Pre-painted Aluminium |
0.7 |
Up to 3000 |
Whiite |
For gypsum board ceiling system
Shadow track can be used as stud runner fixed to the wall with shadow gap effect for gypsum board work in crowdie services area in limited span.
| Thickness(mm) | Length(mm) | |
|---|---|---|
|
Pre painted steel |
0.45-0.7 |
Up to 3000 |
